Wiki source code of Followmeeinrichten

Last modified by Begüm Balat on 2024/05/23 12:09
Show last authors
1 = FollowMe setup =
2
3 The current article explains how to set up !FollowMe via detailed instructions for operating systems Trash.InformatikHelpdeskMacOS, Windows and Linux.
4
5
6
7
8
9
10 {{toc/}}
11
12
13
14 == Setup on Trash.InformatikHelpdeskMacOS ==
15
16 **1.**Access [[Xerox' website>>https://www.support.xerox.com/support/workcentre-7800-series/downloads/enus.html?operatingSystem=winxp]] and download the required driver. In this example: built-in controller (always selected), macOS 10.13 - High Sierra, English.
17
18
19
20 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/1.png||alt="1.png" height="393" width="579"]]
21
22 **2.** Run the downloaded driver and install it. Click twice on \"Continue\" upon being presented with the \"Print Queue Not Created\" window.
23
24
25
26 [[image:41.png||width="900"]]
27
28
29 **3.** The \"Printers & Scanners\" settings should then be opened (Apple menu ##> System preferences ##> Printers & Scanners). Here you can add a new printer by clicking on the \"+\" symbol.
30
31
32
33 [[image:3.png||width="900"]]
34
35
36 **4.** In the \"IP\" tab following settings should be applied:
37
38 * //Address:// print.in.tum.de//
39 * //Protocol:// Internet Printing Protocol - IPP//
40 * //Queue:// printers/followme//
41 * //Name:// arbitrary//
42 * //Location:// arbitrary//
43 * //Use:// choose \"Xerox AltaLink C8030\" and confirm with \"OK\"//
44
45 [[image:4.png||width="900"]]
46
47 [[image:5.png||width="900"]]
48
49
50 **5.** Select the configured printer (in this example \"Followme print\") and choose \"Options & Supplies\".
51
52
53
54 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/5.png||alt="5.png" height="436" width="672"]]
55
56
57 **6.**Apply following settings in the \"Options\" tab:
58
59 * //Paper Trays:// 6 Trays (High Capacity Feeder)//
60 * //Finisher:// Office Finisher LX//
61 * //Hole Punch Module:// 2 and 4 Hole Punch Unit//
62 * //LAN Fax Module:// Not Installed//
63 * //Job Storage Module:// Installed//
64 * //LAN Fax Email Confirmation:// Not Installed//
65
66 [[image:7.png||width="900"]]
67
68
69 **7.**Finally, open [[https:~~/~~/portal.cit.tum.de/ >>https://portal.cit.tum.de/]]and activate the printer in the \"Xerox-Printing\" tab. You'll then be able to use !FollowMe.
70
71 **Remark:** If you are connected via WLAN, the page should remain open while printing. Additionally, you'll have to activate the printer next time again.
72
73 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/mac7-1.png||alt="mac7-1.png" height="370" width="806"]]
74
75 == Setup on Windows ==
76
77 **1.** The RBG provides a modified driver for !FollowMe configuration on Windows. Its usage is at your own risk.
78 [[Download link>>https://xwiki.rbg.tum.de/foswiki/pub/Informatik/Helpdesk/Followmeeinrichten/Xerox-WC78XX-TUM-Driver-1.4.exe]]
79
80 **2.** Launch the downloaded installation program. (Xerox-WC78XX-TUM-Driver-1.4.exe)
81
82 **3.** Pick \"followme\" and, if you'd like to use direct printing, a printer in your proximity.
83
84 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/win1.png||alt="win1.png" height="478" width="621"]]
85
86
87 **4.** Acknowledge the subsequent message by clicking on \"Install this driver software anyway\".
88
89 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/win2.png||alt="win2.png" height="400" width="621"]]
90
91
92 **5.** Select \"Yes\" in the setup pop-up.
93
94 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/win3.png||alt="win3.png" height="277" width="623"]]
95
96
97 **6.** A browser window of ucentral is then opened. Please log in with your RBG account and corresponding password.
98
99 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/win4.png||alt="win4.png" height="284" width="620"]]
100
101
102 **7.** Click \"Xerox-Printing\" on the left side and then \"Diesen Drucker zum Drucken freischalten\"
103
104 **Remark:** If you are connected via WLAN, the page should remain open while printing. Additionally, you'll have to activate the printer next time again.
105
106 [[image:https://xwiki.rbg.tum.de/bin/download/Informatik/Helpdesk/Followmeeinrichten/WebHome/win5-1.png||alt="win5-1.png" height="286" width="622"]]
107
108 == Setup on Linux ==
109
110 First you have to download the driver file [[x2UNIV-C8030.ppd>>https://xwiki.rbg.tum.de/foswiki/pub/Informatik/Benutzerwiki/XeroxDrucker/x2UNIV-C8030.ppd]] from the attachment. For the installation you need root rights e.g. with the help of the command ##sudo##.
111 The following commands (for simple cut & paste) set up the printer with the name ##followme## local:
112
113 The Xerox Universal Printer Driver used is **no** different from the driver used with the previous Xerox !WorkCentre 7835s. For the !AltaLink C8030 printer everything can be take over.
114
115 **Note**: You must execute the following commands in the folder where the driver file is located.
116
117 1 ##curl -O https://xwiki.rbg.tum.de/foswiki/pub/Informatik/Benutzerwiki/XeroxDrucker/x2UNIV-C8030.ppd##
118 1 ##sudo lpadmin -E -p followme -v ipps://print.in.tum.de/printers/followme -P x2UNIV-C8030.ppd -D \"Xerox-Followme\" -L \"TUM-FMI\"
119 ## 1 ##sudo cupsenable followme
120 ## 1 ##sudo cupsaccept followme
121 ## 1 Register at https://ucentral.in.tum.de/cgi-bin/printman.cgi and activate your computer for printing.##
122
123 To set up a separate queue called ## printer ## for documents that can **only** be called up on the printers in the printer, use these commands. A ppd file preconfigured for the Professional Finisher [[x2UNIV-C8045-pf.ppd>>https://xwiki.rbg.tum.de/foswiki/pub/Informatik/Benutzerwiki/XeroxDrucker/x2UNIV-C8030.ppd]] is used.
124
125 1 ##curl -O https://xwiki.rbg.tum.de/foswiki/pub/Informatik/Benutzerwiki/XeroxDrucker/x2UNIV-C8045-pf.ppd##
126 1 ##sudo lpadmin -E -p druckerei -v ipps://print.in.tum.de/printers/druckerei -P x2UNIV-C8045-pf.ppd -D \"Xerox-Druckerei\" -L \"TUM-FMI-Druckerei\"
127 ## 1 ##sudo cupsenable druckerei
128 ## 1 ##sudo cupsaccept druckerei
129 ## 1 Register at https://ucentral.in.tum.de/cgi-bin/printman.cgi and activate your computer for printing.##
130
131 </noautolink>